How to Setup a TP-Link WiFi Router


How to connect TP Link router

Manufacturer TP-Link produces routers of different modifications, so the names of the connectors for the connection and the commands of the software menu may vary depending on the model or firmware version. In general, the management interface of the router software is fairly simple and straightforward.

Login to the router control panel


To enter the settings menu, you need to connect the router to the computer via the local LAN port using a network cable with an RJ-45 connector. The connector is located on the back of the router and can either have a numerical designation or be labeled LAN. Typically, these connectors are colored yellow or orange. After connecting the cable to the router, the latter must be plugged in and wait for the stable operation of the power indicator light.
In the address bar of the browser you need to enter the IP address of the device: 192.168.1.1 or 192.168.0.1, depending on the firmware version. In the window that opens, you must enter the authorization data set by default. Login admin and password admin are used in most models.After entering you can see the main menu located on the left side of the screen. In it, select the System Tools item and click Password in the drop-down list. In the window that opens, you need to change the standard password, then click the Save button to save the changes.

Internet connection setup


The Internet cable must be connected to the WAN or Internet connector on the back of the router, after which you can proceed to setting the parameters. When you select the Network menu item and click on the WAN item, a window will open to enter the Internet connection parameters. The parameter values ​​must be checked with the provider. After entering the parameters you will need to save them. Next, in the same Network item, click on MAC Clone, click the Clone MAC Adress button and save the changes.

Wireless Settings


In the Wireless menu tab, select the Wireless Settings item. In the window that opens, you will need to fill in the empty fields and set values ​​for some parameters. For example, the Wireless Network Name is the desired name of the wireless network. In the Region drop-down list, you must select the country of placement, and the Channel parameter should be set to Auto. The values ​​of the remaining parameters can be left as default.
To configure the security of a wireless connection, select the Wireless security menu item. In the window that opens, you need to set the security protocol type by switching the toggle switch to WPA / WPA2, then set the security parameters:
- for Version (protocol type) set the value of WPA2-PSK;
- set the value TKIP for the Encryption parameter;
- in the PSK Password field enter the network security key, consisting of eight characters.
After making changes, you need to save the settings, then in the System Tools tab, select the Reboot item, and in the window that opens, click the button with the same name, thereby restarting the router.


Video: TP Link WiFi range Extender - Wifi Repeater setUp & reView - WiFi ExTender for Gaming

Tp link 300mbps wireless n router configuration || How to setting TP Link router
How to connect TP Link router






Related news

How to make a design estimate
What are the signs of diabetes in pregnant women?
Какие льготы имеет ветеран труда
How to write a review for a thesis
Excellent SLR camera for a beginner and amateur
Oh how good you are
Где эрогенные места у парней
How to build a bisector of a triangle
Как сделать красивый рождественский венок своими руками
Что такое рекреационная деятельность